Jeg har en SG Blackstorm Date Ceramic. Er veldig fornøyd med den, men den er på vei ut av samlingen til fordel for ny diver (ikke av noe annen grunn enn at forandring fryder). Har kjøpt den ny av Ivar Hauge Line, forfatter av "Nesten Velkledd". Koster vel ny ca 28k, selger den for 10,- /bud. Den er ca 1 år gammel, og er brukt i rotasjon med andre klokkker.
Flere bilder sendes om det er ønskelig.
Case: Stainless Steel AISI 316L polished brush into three parts, 46mm lens, logo engraved Sea-God on the side case at 9, carrure glossy finish on the sides and satin top.
Top Ring: Stainless Steel with 12 titanium screws IP Black customized, embedded, polished and blocked.
Bezel: Unidirectional rotating disk black ceramic graduated from 0 to 60.
Crown: Stainless Steel knurled screw and tightened with three seals. Enhanced by black rubber insert customized with trident, protection side wings. The crown is equipped with a special tightening system that allows the Trident to always remain in a vertical position. This enhanced functionality is a patent Sea-God.
Dial: Black enamel with inscription "BlackStorm" in red, applied indexes with luminescent internal hatching of blue tones. Calendar at 3 o’clock.
Hands: Skeleton, luminescent and customized Sea-God. Continuous seconds in the center, subsidiary seconds with trident counterweight.
Rehaut: Elevated in titanium.
Glass: 4.6 mm thick sapphire lightly convex anti-reflective coating inside.
Case back: Stainless Steel, tightly packed with 12 titanium screws 3mm thread with waves and customized with Trident. On the caseback is engraved personalization anti-counterfeiting and serial number.
Movement: Self-winding mechanical caliber ETA 2824-2, 25 jewels, 25.60 mm diameter. thickness of 4.60 mm, second stop device, oscillating weight on ball bearing, Glucydur balance incabloc shockproof, EtaCron with micrometer screw, alternations / hour 28,800, bi-directional winding rotor, 42 hours autonomy.
Strap: Super black rubber, special material specifically designed for Sea-God watches, adjustable customized with Sea-God logo.
Buckle: Buckle clasp in stainless steel with black DLC coating and customized Sea-God logo.
Water Resistance: Guaranteed up to a pressure of 30 atmospheres or 300 meters.
92EBFB9F-5469-432A-A477-4D3FA63C1E2B_zpsxofcrpza.jpg Photo by Fredrikringe | Photobucket
Flere bilder sendes om det er ønskelig.
Case: Stainless Steel AISI 316L polished brush into three parts, 46mm lens, logo engraved Sea-God on the side case at 9, carrure glossy finish on the sides and satin top.
Top Ring: Stainless Steel with 12 titanium screws IP Black customized, embedded, polished and blocked.
Bezel: Unidirectional rotating disk black ceramic graduated from 0 to 60.
Crown: Stainless Steel knurled screw and tightened with three seals. Enhanced by black rubber insert customized with trident, protection side wings. The crown is equipped with a special tightening system that allows the Trident to always remain in a vertical position. This enhanced functionality is a patent Sea-God.
Dial: Black enamel with inscription "BlackStorm" in red, applied indexes with luminescent internal hatching of blue tones. Calendar at 3 o’clock.
Hands: Skeleton, luminescent and customized Sea-God. Continuous seconds in the center, subsidiary seconds with trident counterweight.
Rehaut: Elevated in titanium.
Glass: 4.6 mm thick sapphire lightly convex anti-reflective coating inside.
Case back: Stainless Steel, tightly packed with 12 titanium screws 3mm thread with waves and customized with Trident. On the caseback is engraved personalization anti-counterfeiting and serial number.
Movement: Self-winding mechanical caliber ETA 2824-2, 25 jewels, 25.60 mm diameter. thickness of 4.60 mm, second stop device, oscillating weight on ball bearing, Glucydur balance incabloc shockproof, EtaCron with micrometer screw, alternations / hour 28,800, bi-directional winding rotor, 42 hours autonomy.
Strap: Super black rubber, special material specifically designed for Sea-God watches, adjustable customized with Sea-God logo.
Buckle: Buckle clasp in stainless steel with black DLC coating and customized Sea-God logo.
Water Resistance: Guaranteed up to a pressure of 30 atmospheres or 300 meters.
92EBFB9F-5469-432A-A477-4D3FA63C1E2B_zpsxofcrpza.jpg Photo by Fredrikringe | Photobucket
Redigert: