Bezel markings
Most contemporary dive watches with conspicuous 15 or 20 minute markings on their bezels, are the result of copying a Rolex bezel design of the 1950s. Back then divers typically planned a dive to a certain maximum depth based on now obsolete US Navy dive tables, and dove according to the planned dive profile. If the dive profile allowed a bottom time of 35 minutes the diver, upon entering the water, would set the marker on the bezel, 35 minutes ahead of the minute hand. The diver calculated this with the 60 - bottom time formulae (60 - 35 = 25, for 35 minutes bottom time the diver would align the 25 minute bezel-mark with the minute hand). Once the minute hand reached the main-marker on the bezel the diver would begin his ascent to the surface. The 15 or 20 minute scale helped with timing the ascent and whatever safety stop the diver deemed necessary. For contemporary diving methods the 15 or 20 minute "count-down" bezel is quite antiquated.
Mitt resonnement vil vel være at hvis du bruker dykkerklokken til å dykke vil antall minutter igjen på flasken være litt viktigere enn "omtrentelig" det siste kvarteret? Og motsatt, om du har 41 eller 42 min igjen er kanskje ikke så viktig?